Maximum midband output power: 1250W @ 2 Ohms, 900W @ 4 Ohms, 550W @ 8 Ohms (THD = 1%, 1 kHz, Dual-Channel)

Rated output power: 800W @ 4 Ohms, 400W @ 8 Ohms (THD

Maximum single-Channel output power (Dynamic-Headroom IHF-A): 2450W @ 2 Ohms, 1400W @ 4 Ohms, 700W @ 8 Ohms

Maximum single-Channel output power (

Continuous, 1 kHz): 1700W @ 2 Ohms, 1100W @ 4 Ohms, 630W @ 8 Ohms

Maximum Bridged output power (THD=1%, 1kHz): 2800W @ 4 Ohms, 1800W @ 8 Ohms

Maximum RMS Voltage swing: 78.8V

Power Bandwidth (THD = 1%, ref. 1kHz, half power @ 4 Ohms):

Voltage Gain (ref. 1kHz): 32dB

Input Sensitivity: +5.1dBu

THD at rated output power (MBW = 80 kHz, 1 kHz):

IMD-SMPTE (60 Hz, 7 kHz):

DIM30 (3.15 kHz, 15 kHz):

Maximum Input Level: +21 dBu (8.69 VRMS)

Crosstalk (ref. 1 kHz, at rated output power)

Frequency Response (ref. 1 kHz 10Hz–40 Hz (±1 dB)

Input Impedance (active Balanced): 20 kOhm

Damping Factor: 1 kHz > 300

Slew Rate: 27 V/ Μs

Signal-to-noise-ratio Amplifier (A-Weighted): >109 dB

Output Noise (A-Weighted):

Output Stage topology: Class H

Power consumption (1/8 maximum power @ 4 Ohms): 700W

Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, inrush current limiters, turn-on Delay

Cooling: Front-to-rear, 3-Stage fans

Ambient temperature limits: 40°—105–F

Safety Class: I

Dimensions: 483mm W x 88.1mm H x 421.5mm D

Weight: 35 lb.

Signal processing: LPN, switchable

Comprehensive protection system — Protects against overheating, Overload, short-circuit, HF, AND DC

Patented LPN Filter — Switchable Frequency and Phase response correction of connected loudspeakers