Gigabit Switch 24x 10/100/1000 RJ45 POE+ 2x SFP Managed.

It enables power supply and data transmission of up to 24 PoE network devices

It saves time and money by using existing network cables for power and data transmission

10/100/1000 ports with automatic detection of optimal network speed

Equipped with two slots (SFP) for GBIC modules

RJ45 PoE/PoE+ output ports compliant with IEEE 802.3at/af

Output power up to 30 W per port

Total switch power 240 W

Cooperation with PoE devices compliant with IEEE 802.3at and 802.3af (wireless access points, VoIP phones, network cameras)

Powered Device Monitor (PDM) restarts any connected PoE device that is not responding or sending network traffic

Supports IEEE 802.3 at/af detection and protection against short circuit, overload and overvoltage

All RJ45 ports have MDIX auto-crossing and NWay auto-negotiation

Web-based configuration

Remote reboot/reboot

Supports SNMP management

VLAN support based on tags or ports (tag-based, port-based)

IEEE 802.1x port-based authentication

Supports port aggregation (trunking)

IGMP Snooping for multicast filtering

Bandwidth management for all ports

Supports port mirroring

Support for two types of QoS: port-based and DSCP

"Broadcast storm control" function with the ability to set the "multicast" packet flow

Support for jumbo frames up to 9KB

Support for Rapid Spanning Tree/Spanning Tree protocols

Store and forward switching architecture

Full/half duplex modes

Supports IEEE 802.3x full duplex flow control

512 kB memory buffer

8k MAC address table

Signaling diodes: power, link/activity and PoE

Two high-performance fans ensure perfect ventilation

Configuration via a web browser

Signaling diodes: power, link/activity and PoE

IEEE 802.1d (Spanning Tree protocol)

IEEE 802.1p (Traffic Prioritization)

IEEE 802.1q (VLAN Tagging)

IEEE 802.1w (Rapid Spanning Tree Protocol)IEEE 802.3ad (Link Aggregation)

IEEE 802.3 (10Base-T Ethernet)

IEEE 802.3ab (Gigabit Ethernet Twisted Pair)

IEEE 802.3ad (Link Aggregation Control LACP Protocol)

IEEE 802.3az (Energy Efficient Ethernet EEE)

IEEE 802.3af (Power over Ethernet 802.3at Type 1)

IEEE 802.3at (Power over Ethernet 802.3at Type 2)

IEEE 802.3u (100Base-TX Fast Ethernet)

IEEE 802.3x (flow control, full duplex)

Based on ports or DSCP

Operating temperature: 0 - 40°C

Operating humidity: 10% - 90% RH, non-condensing

Storage temperature: -20 - 70°C

24-Port Gigabit PoE+ Managed Switch with 2 SFP Slots

Power cable

User manual

19" mounting brackets

Input voltage: 90 - 260 V AC, 50 - 60 Hz 440 x 208 x 44 mm Broadcast media:

10Base-T Cat3, 4, 5 UTP/STP RJ-45

100Base-TX Cat5 UTP/STP RJ-45

1000Base-T Cat5e UTP/STP RJ-45

Packet forwarding/filtering throughput:

1,488, 000 p/s (1000 Mb/s)

148,800 p/s (100 Mbps)

14,880 p/s (10 Mbps)

Bus bandwidth: 52 Gb/s Configuration options:

Port bandwidth: 10 Mb/s, 100 Mb/s, 1000 Mb/s or auto-negotiation

PoE enabled/disabled for a specific port

Maximum PoE power per port

PoE type on the port

PoE priority on the port

PoE device monitoring

Flow control enabled/disabled for a specific port

VLAN

Rate limiting (output speed and input speed)

Port Mirroring

Port isolation

Port Aggregation/LACP: 8 groups

Broadcast Storm Configuration

IGMP Snooping

Integrated VeriPHY diagnostic tool

Integrated Ping ICMP client that sends PING requests to other network nodes

SNMPv1/v2c (Simple Network Management Protocol)

LAN Settings (IP Address, Gateway, etc. )