TP-LINK Switch 16x1000Mbps (POE+) + 2xGigabit SFP Fémházas Rackes, DS1018GMP HARDWARE FEATURESStandards and ProtocolsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3z, IEEE 802.1pInterface16× 10/100/1000 Mbps PoE+ RJ45 ports 2× Combo Gigabit SFP slotsNetwork Media10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100? STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100? STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100? STP (maximum 100m) 1000BASE-X MMF, SMFFan Quantity2Physical Security LockYesPower Supply100–240 VAC, 50/60 HzPoE+ Ports(RJ45)Standard: 802.3at/802.3af compliant PoE Ports: Ports 1–16 PoE Power Budget: 250 WDimensions ( W x D x H )17.3 × 7.1 × 1.73 in (440 × 180 × 44 mm)MountingRack MountableMax Power Consumption19 W (220/50 Hz. no PD connected) 293.34 W (220/50 Hz. with 250 W PD connected)Max Heat Dissipation64.79 BTU/h (no PD connected) 1000.29 BTU/h (with 250 W PD connected)PERFORMANCESwitching Capacity36 GbpsPacket Forwarding Rate26.78 MbpsMAC Address Table8KPacket Buffer Memory4.1 MbitAdvanced FunctionsCompatible With IEEE 802.3af/at Compliant PDs Extend Mode: Ports 1–4** Priority Mode: Ports 1–4 Isolation Mode: Ports 1-8/9-16 PoE Auto Recovery: Ports 1-16 Mac Address Auto-Learning and Auto-Aging 802.1p/DSCP QoS IEEE802.3x Flow ControlJumbo Frame10 KBOTHERSCertificationCE, FCC, RoHSPackage ContentsDS1018GMP Installation Guide Power Cord Rackmount Kit Rubber FeetEnvironmentOperating Temperature: 0–50 °C (32–122 °F) Storage Temperature: -40–70 °C (-40–158 °F) Operating Humidity: 10–90% RH non-condensing Storage Humidity: 5–90% RH non-condensing