SHURE MX410C Gégecsöves 10" Mikrofonszár

10" (25.4 cm), mikrofonszár

Kardioid Kapszula

Két Színű Állapotjelző

CommShield technológia

Külső Előerősítő, (MX400SMP)

Szín:fekete

10" (25.4 cm), bi-color status indicator, includes surface mount preamp (cardioid or supercardioid polar pattern)TypeCondenser (electret bias)Frequency Response50 to 17000 HzPolar PatternMX405/C, MX410/C, MX415/C: CardioidMX405/S, MX410/S, MX415/S: SupercardioidOutput ImpedanceEIA Rated at 150 Ohms (170 Ohms actual)Output ConfigurationActive balancedSensitivity (at 1 kHz , open circuit voltage)Cardioid: -35 dBV/Pa (18 mV)Supercardioid: -34 dBV/Pa (21 mV)1 Pascal=94 dB SPLMaximum SPL (1 kHz at 1% THD, 1 kilohm load)Cardioid: 121 dBSupercardioid: 120 dBEquivalent Output Noise (A-weighted)Cardioid: 28 dB SPLSupercardioid: 27 dB SPLSignal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)Cardioid: 66 dBSupercardioid: 68 dBDynamic Range (1 kilohm load at 1 kHz)3 dBCommon Mode Rejection (10 Hz to 100 kHz)45 dB minimumPreamplifier Output Clipping Level (1% THD)-8 dBV (0.4 V)Polarity3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connectorNet WeightMX405: 0.119 lbs (0.054 kg)MX410: 0.150 lbs (0.068 kg)MX415: . 154 lbs (. 07kg)MX400DP: 1.138 lbs (0.516 kg)MX400SMP (w/ Kit): 0.275 lbs (0.125 kg)Logic ConnectionsLED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50VLOGIC OUT: Active low (≤1.0V), syncs up to 20mA, TTL compatibleAbsolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)Mute Switch Attenuation-50 dB minimumCableMX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic controlEnvironmental ConditionsOperating Temperature: -18 to 57 deg. C (0 to 135 deg. F)Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)Relative Humidity: 0 to 95%Power Requirements48 to 52 Vdc phantom, 8.0 mA