The power supply generation of the SINLINE USB HID series provides full power protection for advanced single and multi-processor servers, PCs, computer terminals and small to medium-sized networks. Characteristics:

Automatic mains voltage regulation system AVR (increasing) - allows you to adjust incorrect input voltage to the level acceptable by receivers without the use of batteries.

Clear Digital Sinus (CDS) system - enables the generation of a pure sinusoidal voltage at the output of the UPS during battery operation.

Cool Battery Charging (CBC) system - a fast and efficient charging system that reduces charging time and extends the life of the UPS battery.

Overload, short-circuit, over-voltage and miswiring protection.

LAN filter (1 Gbit/s) to protect the network card against surges.

USB HID communication interface compatible with HID Power Devices, allowing the UPS to cooperate with other devices without installing software (the power supply is visible in the system as a battery).

Extended switching thresholds (possible to be set using the PowerSoft software) with the following values:

Network - ups: ~145V - ~280V +/- 2%

Ups - mains: ~150V - ~275V +/- 2%

PowerSoft Professional - free software for monitoring and managing power supplies

Advanced configuration of events - a possibility of creating rules depending on the PSU operation modes, messages and alarms.

Delay before power supply output is restarted (used with BIOS restart option for computers)

Height: 132 (3U) mm

Width: 483 (19) mm

Depth: 400 mm

Application: Small office and home, Server room

Working temperatures [°C]: 0 ÷ +40

Cooling: Natural

Rated input voltage (rms) [V]: ~ 230

Input voltage range (rms) [V] and tolerance [%]: ~ 160 ÷ 264 (145 ÷ 280) 2

Rated frequency of the input voltage [Hz]: 50

Input frequency range [Hz] and tolerance [Hz]: 45 ÷ 55 1

Switching thresholds: UPS network [V]: ~ 160 ÷ 264 (145 ÷ 280) 2 %

Nominal output voltage (rms) [V]: ~ 230

Output voltage range (rms) [V] and tolerance [%] - mains operation : ~ 184 ÷ 264 (167 ÷ 280) 2

Output voltage range (rms) [V] and tolerance [%] - back-up operation : ~ 230 5

Output voltage shape (backup / mains operation): Sinusoidal / Same as input

Rated frequency of the output voltage [Hz]: 50

Frequency range (tolerance) - mains operation [Hz]: synchronous with mains

Frequency range (tolerance) - back-up operation [Hz]: 50 1

Output voltage filtering : LC, RFI/EMI interference filter, varistor suppressor

Switching thresholds: UPS mains [V]: ~ 165 / 259 (150 / 275) 2 %

Switchover time to standby operation [ms]:

Time to return to mains operation [ms]: 0

Internal batteries: 12 V / 7 Ah VRLA

Internal battery backup time (100 % / 80 % / 50 % Pmax) [min]: 3 / 4 / 8

DC circuit nominal voltage [V]: 48

Maximum UPS internal battery charging time - after 80 % battery discharge [h]: 7

Transport position: horizontal

Maximum output wire length [m]:

Signaling: Acoustic-optical; LED

Data line filter - RJ45: LAN 1 Gbit/s

Monitoring and management software: PowerSoft Professional

Cold start: yes