TP-LINK Wireless Access Point Tri-Band BE11000 Wifi 7 Mennyezetre rögzíthető, EAP773 HARDVER JELLEMZŐKCsatlakozások1× 10G Ethernet PortGombResetHálózati tápegység802.3at PoE or 12V/2.5A DCEnergiafelvétel25.44 W (For PoE) 22.57 W (For DC)Méretek (Sz x Mé x Ma)8.7 × 8.7 × 1.3 in (220 × 220 × 32.5 mm)Antenna típusa2.4 GHz: 2× 4.0 dBi 5 GHz: 2× 5.0 dBi 6 GHz: 2× 5.0 dBiBluetooth1 × 4.0 dBi, Bluetooth 5.2 *Firmware update may be required. FelszerelésCeiling / Wall Mounting (Kits Included)VEZETÉK NÉLKÜLI JELLEMZŐKCoverage140?(1500 ft2) §Concurrent Clients380+ **Wi-Fi sztenderdIEEE 802.11 a/b/g/n/ac/ax/beFrekvencia6 GHz, 5 GHz, and 2.4 GHzAdatátvitel574 Mbps (2.4 GHz) + 4320 Mbps (5 GHz) + 5760 Mbps (6 GHz) †Vezeték nélküli funkciókMLO ‡ 4K-QAM ‡ MU-MIMO ‡ HE320 ‡ Mesh ? BSS Coloring ‡ OFDMA ‡ Load Balance Band Steering Beamforming Airtime Fairness Multiple SSIDS:24(8 on each band) Wireless Schedule Reboot Schedule QoS(WMM) Rate Limit Static IP/Dynamic IP RADIUS Accounting MAC AuthenticationVezeték nélküli biztonságCaptive Portal Authentication ? Access Control Maximum number of MAC Filter: 4,000 Wireless Isolation Between Clients VLAN Rogue AP Detection WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/EnterpriseÁtviteli teljesítmény Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software ControllerCloud AccessYes. Require the use of an OC300, OC200, Omada Software Controller, or an Omada Cloud-Based Controller. Riasztás e-mailbenYesLED ki/bekapcsolásYesMac-cím alapú vezérlésYesSNMPv1, v2c, v3Syslog helyi/távoliYesWebes felelületű vezérlésYesEGYÉB JELLEMZŐKTanúsítványokCE, FCC, RoHS, ICCsomagolás tartalmaEAP773 Installation Guide Ceiling/Wall Mounting Kits Note: Power Adapter is NOT included. KörnyezetOperating Temperature: 0 °C–40 °C (32 °F–104 °F); Storage Temperature: -40 °C–70 °C (-40 °F–158 °F); Operating Humidity: 10%–90% non-condensing; Storage Humidity: 5%–90% non-condensing;

A további hardware verziókkal kapcsolatos információkat a Támogatás menüpont alatt találja.

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Double channel width and speed refer to 320 MHz compared to 160 MHz for WiFi 6 routers. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

‡ Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, MU-MIMO and BSS Color requires clients to also support the corresponding features.

* Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Go to /hu/omada-cloud-based-controller/product -list/ to confirm which models are compatible with Omada Cloud-Based Controller.

** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

§ Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.

? Omada Mesh, AI Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.